Hydraulic Pump for Log Splitters, 11 GPM, 2 Stage, 3000 PSI

Description

11 GPM 2 Stage Log Splitter Pump
This replacement pump fits a wide variety of log splitters and outdoor power equipment. Pump works in both horizontal and vertical orientations.
The included inlet nipple requires a 1" inner diameter suction hose. The outlet port is 1/2" NPT (F). The 1/2" shaft is keyed.
We recommend using an Lovejoy-style jaw coupling and mounting bracket to connect the pump to an engine. Couplings and mounting brackets are available.
We recommend using at least a 5hp 163cc engine to maintain 3,600 rpm under load.
Use AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46) light hydraulic fluid or Dexron III automatic transmission fluid.
This pump is not designed for use with “universal” or "tractor" transmission oil, such as "303". Use of incorrect fluid may damage the pump and void the warranty.
Suction-side filtration should be no finer than 150 micron. Use of a 10-25 micron filter on the suction side of the pump is too restrictive and will cause failure.
Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump.
Material: Aluminum Body
Keyway: 1/8" (0.125 inch)
Dimensions: 5.5" x 3" x 4"
Mounting Flange: 4 Bolt Holes, 2" on Center
Bolt Circle (inch): 2.85"
Bolt Hole: M8 (.315")
We are a US seller based in Boston. All products ship from our US warehouse.
window.NREUM||(NREUM={});NREUM.info={"beacon":"bam-cell.nr-data.net","licenseKey":"32933b6325","applicationID":"66754545","transactionName":"ZgEAMkVZXEVZUEFdXV9LNxReF1ZTS1BHXUJFDQ0IGUhaRg==","queueTime":0,"applicationTime":172,"atts":"SkYDRA1DT0s=","errorBeacon":"bam-cell.nr-data.net","agent":""}