Cisco Voice Collaboration Lab Kit 2811 CME w/ FXO PVDM2 Card 3560 7942 CCNA CCNP

Description

This Voice/Collaboration Lab is a fully configured Lab
, ready to use from the first minute!
Once all the connections are made (setup guide provided),
you'll be able to make Phone calls right away!
It includes a Full Set of Voice
Lab Exercises & Video Training!
This Lab kit is based on a Voice-enabled Cisco
2811 ISR Router
with Cisco Unified
CME 8.6
(Cisco Unified Communications Manager Express) & with
CCP 2.7
(Cisco Conf. Professional)
.
The 2811 Router includes an
FXO card
, so that you can
make/receive Phone Calls
to/from the
outside world!
A
PVDM2 Module
is also included (needed to enable the FXO card)
.
This is the complete list of main components:
- Cisco 2811 Router with 256 Mb. in DRAM and 128 Mb. in Flash
- 2811 is loaded with
CME 8.6
(Call Manager Express) and with
CCP 2.7
(Cisco Configuration Professional)
-
Cisco 3560-PS Switch
with 24 Fast Ethernet interfaces &
PoE
(Power over Ethernet)
-
VIC2-2FXO Card
to make Phone Calls to the Outside world
-
PVDM2 DSP Module
(needed to enable the FXO card)
-
2 x Cisco 7942 IP Phones
- Cisco IP Communicator 8.6 (a Software-based Phone that acts as a third IP Phone!)
NOTE:
Picture shows two External Power Supplies for the IP Phones.
But they are not included.
They are
optional,
although not really needed because the PoE Switch is enough to power up the IP Phones.
Please also notice that the picture shows a 7940 + 7960 Phones.  But this item includes 2 x 7942's.
These Phones can be upgraded to other models (see the Upgrades Section).
Ro
uter's Memory size:
256 Mb. in DRAM and 128 Mb. in Flash
CCNP Collaboration Certification
:
As you may know, Cisco has
replaced
the old CCNA Collaboration Cert.
with a
new CCNP Collaboration Certification!
Most of the Exam Topics previously included in the former CCNA Collaboration Cert. are now included in the new CCNP Collaboration Concentration Exams.
This Lab kit is the
main piece
for the
CLACCM Exam 300-815
(Cisco Advanced Call Control & Mobility Services)
Optional Upgrades
:
We offer a similar Lab kit, but with a
2911 Router
(instead of the 2811)
The 2911 Router supports
CME 12.0
(instead of CME 8.6)
And for Lab kit we offer the following upgrade options:
- IP Phones can be upgraded to 7945 or 9971
(9971 is a Video Phone with Camera!)
- FXS Card can be added
(needed to connect an
Analog Phone or Fax
)
-
Dell Server with CUCM Software Suite
(latest version 12.0) can also be added
A
CUCM Server
is needed for the new CCNP Collaboration
Core Exam
(350-801 CLCOR)
This is the
eBay item number
for our Dell CUCM Server:
281462723800
This is the direct link to it:
ebay.com/itm/281462723800
Our Lab kit is shipped
Fully Configured
and ready to make Phone calls right away!
All components are in Excellent Condition they come with
1-Year
Warranty
!
A Bonus Disk is included with this Lab
!
The Disk includes all Software elements:
CME 8.
6
, CCP 2.7,
IP Communicator
, IOS I
m
ages & dozens of IP Phone Firmware Files!
IP Communicator
is a Software-based Phone (or Soft-Phone) that can be used to
call the other Phones
in the Network!
It also includes a
Lab Exercise Guide
(eBook in PDF format)
We actuall
y
offer other
Voice/Collaboration Lab kits
with
different
component
combinations
.
So please make sure to check out our
other items
and
review our current o
ffers
Cables and other Accessories
:
- 1 x Console Cable
- 3 x Ethernet Cables
- 2 x Power Cables
Lab Setup
:
All IP Phones are connected to the CME Router through the Ethernet Network,
which requires a LAN Switch.
This Lab includes a 3560-PS Switch with PoE
(Power over Ethernet)
.
One port of the Switch has to be connected to the Router's Ethernet interface and the other ports can be used for the IP Phones.
Once you make the physical connection (described in the User's Guide), you'll be ready to start making phone calls!
No other Hardware is required to make calls between the Phones connected to the LAN!
The 2811 Router includes an
FXO voice card
and a
PVDM
so that you can make calls
outside the LAN
.
The 2811 Router
supports up to 35 IP Phones
and up to 144 Virtual Ports
User Manual
:
We include complete setup instructions and a
Proprietary Lab Guide/Manual
that explains all the configuration steps
, so that you can re-create the configuration by yourself!
Other Lab Guides with multiple Lab Exercises are also provided.
We are PWR Sellers with a 100% positive feedback record
.
We've been providing high quality Cisco gear for several years (please check our feedback).  So you can buy with confidence from us.
Note:
You must allow
1-2 days for processing
and
3-5 business days for ground shipping
(depends on where you live).
Ground shipping fee applies to the Continental USA
(lower 48 states)
only.
We can't use USPS to ship this item
, unless the shipping location is in
Alaska
,
Hawaii or P/Rico.
If that's the case, then
a higher shipping fee applies
(to AK or PR).  You would need to select the
Priority Mail option in that case.
Thank you for looking
!
C2811#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M),
Version 15.1(4)M10
, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 10-Aug-11 05:17 by prod_rel_team
ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)
C2811 uptime is 55 minutes
System returned to ROM by reload at 03:16:46 UTC Sun Oct 23 2011
System image file is "
c2800nm-adventerprisek9-mz.151-4.M10
.bin
"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Cisco 2811 (revision 1.0) with
245000K/12288K bytes of memory.
Processor board ID FTX1006C1HD
2 Fast Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
128000K bytes of ATA CompactFlash
(Read/Write)
Configuration register is 0x2102
C2811#sh telephony-service
CONFIG (Version=8.
6
)
=====================
Version 8.
6
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_serie
s_home.html
protocol mode default
ip source-address 172.25.140.1 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
max-ephones 58
max-dn 144
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
privacy
no privacy-on-hold
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 10
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US   (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US    (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
web admin system name Admin
web admin customer name Customer
edit DN through Web:  disabled.
edit TIME through web:  disabled.
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
transfer-digit-collect new-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
C2811#