-40%

Cisco CCENT CCNA CCNP Basic Voice + QoS Lab Kit CME Phones Voice Traffic QoS Lab

$ 157.87

Availability: 90 in stock
  • Item must be returned within: 30 Days
  • Restocking Fee: 20%
  • Condition: Used
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Brand: Cisco
  • MPN: CCNA CCNP CCIE
  • All returns accepted: Returns Accepted

    Description

    INTERNATIONAL, HAWAII, ALASKA,  PUERTO RICO BIDDERS, PLEASE EMAIL US FOR SHIPPING COST PRIOR TO BUYING
    International, HAWAII, ALASKA, Puerto Rico, APO/FPO bidders, shipping cost stated in the auction is for anywhere within the 48 states of the United States. Please email us prior to buying for specific shipping cost.
    contact me via eBay
    Please contact us at contact me via eBay if you have any question
    s about this or other labs.
    Voice Traffic QoS Lab
    Cisco CCENT CCNA CCNP Voice Lab Kit
    Cisco26
    5
    0
    Cisco1721
    Cisco WS-C3560-24PS-S Inline Power Switch
    ICND1v2 &ICND2v2 200-120 200-101 100-105
    Total Items Included in This Auction
    1 x Cisco 26
    5
    0 Series Router 32F/128D 12.4 IOS c2600-ipvoice-mz.124-1a.bin
    1 x Cisco WS-C2960-24 or C3750 Port 10/100 Inline Power Switch
    2 x Cisco1721 Routers 8F/16D 12.1 IOS
    4 x Cisco WIC-1T Interface Module Card
    2 x Cisco CP-7940G (or other Cisco) Phones (working but very rough condition )
    2 x Serial Cat5 Connection Cable
    3 x Ethernet Cable
    1 x Console Cable
    6 x Power Cable
    Installed with working Call Manage Express CME 4.0. This lab is intended for SIP trunking to access the outside PSTN so you can call in and out anytime. Plus QoS video to demonstrate how to control voice traffic over WANs with QoS.
    No legacy analog ports included in this lab because SIP trunking is cheaper and better.
    Add legacy 2xFXS & 2xFXO for an additional and run in the 2650 router.
    This lab is an excellent introduction to Cisco CME Call
    M
    anager Express SIP based software PBX.
    Most QoS instruction is awful, the worst I have ever seen, turning a subject of average difficulty into a total train wreck giving the student to impression QoS is more difficult than it really is.
    The goal of this lab is to provide tools and information to master Cisco QoS
    .
    DVD includes video demonstrating how to implement Cisco QoS and
    more importantly you can use this lab to practice QoS technologies in support of voice traffic. You can reduce the bandwidth of the T1 interfaces down to 56k
    ,
    jam them with traffic,
    and
    use QoS to make a clear path for you voice traffic over the congested links.
    Classification and Marking
    Queueing and Congestion Management
    Congestion Avoidance Weighted Random Early Detection (WRED)
    Policing and Shaping
    Quality of Service (QoS) Frame Relay
    Quality of Service (QoS) Over Asynchronous Transfer Mode (ATM)
    Voice and Quality of Service (QoS)
    Related Information
    Related Cisco Support Community Discussions
    Quality of Service (QoS) is
    QoS is a collection of technologies which allows applications to request and receive predictable service levels in terms of data throughput capacity (bandwidth), latency variations (jitter), and delay. In particular, QoS features provide better and more predictable network service by the following methods:
    Supporting dedicated bandwidth.
    Improving loss characteristics.
    Avoiding and managing network congestion.
    Shaping network traffic.
    Setting traffic priorities across the network.
    The Internet Engineering Task Force (IETF) defines the following two architectures for QoS:
    Integrated Services (IntServ)
    Differentiated Services (DiffServ)
    IntServ uses the Resource Reservation Protocol (RSVP) to signal explicitly the QoS needs of an application's traffic along the devices in the end-to-end path through the network. If every network device along the path can reserve the necessary bandwidth, the originating application can begin transmitting. Request for Comments (RFC) 2205 defines RSVP, and RFC 1633 defines IntServ.
    DiffServ focuses on aggregated and provisioned QoS. Instead of signaling an application's QoS requirements, DiffServ uses a DiffServ Code Point (DSCP) in the IP header to indicate the required QoS levels. Cisco IOS® Software Release 12.1(5)T introduced DiffServ compliance on Cisco routers. For more information, refer to the following documents:
    Integrated Service in Cisco IOS 12.1
    Implementing DiffServ for End-to-End Quality of Service
    Implementing Quality of Service Policies with DSCP
    An interface experiences congestion when it is presented with more traffic than it can handle. Network congestion points are strong candidates for Quality of Service (QoS) mechanisms. The following is an example of typical congestion points:
    Classification and Marking
    IP precedence
    QoS pre-classification enables you to match on and classify the original IP header contents of packets undergoing tunnel encapsulation and/or encryption.
    Configuring QoS for Virtual Private Networks
    Quality of Service for Virtual Private Networks, 12.2(2)T Feature Module
    The class-based marking feature allows you to set or mark the layer 2, layer 3 or Multiprotocol Label Switching (MPLS) header of your packets. For more information, refer to the following documents:
    Yes. Network Based Application Recognition (NBAR) allows you to classify packets by matching on fields at the application layer. Prior to the introduction of NBAR, the most granular classification was layer 4 Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) port numbers. For more information, refer to the following documents:
    Network-Based Application Recognition Q&A
    NBAR Application Networking
    Using Network-Based Application Recognition and Access Control Lists for Blocking the Code Red Worm
    How to Protect Your Network Against the Nimda Virus
    Support for NBAR is introduced in the following versions of Cisco IOS software on most platforms in 12.1(5)T You need to enable Cisco Express Forwarding (CEF) in order to use NBAR.
    Queueing is designed to accommodate temporary congestion on a network device's interface by storing excess packets in buffers until bandwidth becomes available. Cisco IOS routers support several queueing methods to meet the varying bandwidth, jitter, and delay requirements of different applications.
    The default mechanism on most interfaces is First In First Out (FIFO). Some traffic types have more demanding delay/jitter requirements. Thus, one of the following alternative queueing mechanisms should be configured or is enabled by default:
    Weighted Fair Queueing (WFQ)
    Class-Based Weighted Fair Queueing (CBWFQ)
    Low Latency Queueing (LLQ), which is in fact CBWFQ with a Priority Queue (PQ) (known as PQCBWFQ)
    Priority Queueing (PQ)
    Custom Queueing (CQ)
    Queueing generally happens on outbound interfaces only. A router queues packets that are going out an interface. You can police inbound traffic, but usually you cannot queue inbound (an exception is receive-side buffering on a Cisco 7500 Series router using distributed Cisco Express Forwarding (dCEF) to forward packets from the ingress to the egress interface; for more information, refer to Understanding VIP CPU Running at 99% and Rx-Side Buffering. On high-end distributed platforms such as the Cisco 7500 and 12000 Series, the inbound interface may use its own packet buffers to store excess traffic switched to a congested outbound interface following the inbound interface's switching decision. In rare conditions, typically when the inbound interface is feeding a slower outbound interface, the inbound interface can experience incrementing ignored errors when it runs out of packet memory. Excessive congestion can lead to output queue drops. Input queue drops have a different root cause most of the time . For more info on troubleshooting drops, refer to the following document:
    Also included a BONUS DVD.
    This DVD gives you:
    1. Complete practice labs which can be easily accomplished on the equipment you purchase.
    2. Instructional material including current books and videos so you can understand what to do.
    3. Utilities such as SDM software/TFTP software/Console Emulation that you will need to manage and configure the equipment.
    CCNA Routing and Switching
    CCNA Composite Exam: The 200-120 is the composite exam associated with the Cisco CCNA Routing and Switching certification. This exam tests a candidate's knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network. The topics include all the areas covered under ICND 1 and ICND2 Exams.
    640-802 CCNA Composite
    640-822 ICND1
    640-816 ICND2
    The exams above have been now replaced with the following exams:
    200-120 CCNA Composite
    100-105 ICND1
    200-101 ICND2
    To obtain a CCNA Routing and Switching you must pass two written exams or one composite exam.
    Interconnecting Cisco Networking Devices Part 1 (ICND1v2)
    Interconnecting Cisco Networking Devices Part 2 (ICND2v2)
    200-120 CCNA Composite
    Both focus on providing the skills and knowledge necessary to implement and support a small switched and routed network.
    Please contact us at contact me via eBay if you have any question.
    This is a complete solution including the study material you need to begin practicing on the day you receive the lab.
    Ebay Lab Sales!
    contact me via eBay
    Don't know what to buy?
    Students review your study material and look for the model numbers of routers and switches being used in books and classes. Then we can tailor a lab to fit your exact needs. If you are setting up your lab and get stuck, call us. A problem that may take you two days to solve may be solved over the phone in an hour. Everything seems difficult the first time when it is new and strange but gradually becomes second nature.
    Warranty Information
    Our feedback says it all. We support our buyers after their purchase with any help they need. We offer a 30 day warranty on all CCNA CCNP and CCIE labs, parts and equipment sold. Every machine and every port are carefully and fully tested and come with a printout.
    Used lab equipment often has cosmetic blemishes but are 100% functional.
    Problems and Returns
    What To Do If You Have A Problem !
    Contacting us directly will get you the fastest response. If you have any questions or complaints feel free to call or email through eBay email or directly to our email address in your PayPal payment conformation email or from our website.
    Customer Satisfaction #1
    CCNA / CCNP / CCIE labs are complicated equipment and cannot be managed without experience or instruction.  Helping CCNA CCNP CCIE students make progress is our goal so feel free to contact us with any problems or questions about the equipment you purchase.  Most problems are resolved over the phone or by email. Please keep us advised about any new study labs you are using to prepare for your exams.
    contact me via eBay
    In Hand
    We are a large reseller of used Cisco networking equipment based in Southern California. We are a stocking broker and every item listed for sale is already in stock, tested and ready to ship. We are happy to source equipment at the buyers request if we don't have the item in hand.
    Testing
    More than 14 years of experience testing and upgrading Cisco. Every used Cisco router or switch and every port is tested and comes with a test printout.
    Full Service
    We offer a complete line of CCNA, CCNP and CCIE study labs listed in our other auctions. We also carry a complete line of individual items including Cisco study lab, back to back serial, CAB-6060, ethernet and console cables, rack mounts, AUI, GBIC transceivers, flash & DRAM memory, slot covers, 12U racks, WIC interface cards, NM Modules, and every Cisco router or switch needed.
    Low Prices
    We work hard to offer the lowest prices on eBay so if a competitor is offering a lower price please contact us and we will try and beat their price.
    PAYMENT INFORMATION
    Payment
    Visa
    Mastercard
    American Express
    Paypal
    Company Check
    Payment is due immediately unless otherwise agreed.
    PayPal, , Visa & Master Card accepted
    Checks are accepted and item(s) are shipped after checks are cleared
    Please make sure your PayPal address is update to your current address. Purchased will be shipped to your PayPal address not your eBay address.
    International, HAWAII, ALASKA, Puerto Rico bidders, shipping cost stated in the auction is for anywhere within the 48 states of the United States. Please email us prior to buying for specific shipping cost.
    SHIPPING (extra costs apply!)
    We ship worldwide!
    We ship to AFO/FPO!
    Have It Tomorrow! Overnight Shipping Available Until 4PM PST (Additional Cost)
    We ship to PayPal confirmed address otherwise please email us in advance.
    Most items shipped by FedEx Ground
    Shipping to AFO/FPO/PO BOX for additional cost please contact us in advance for price quote via USPS
    Items shipped on the SAME DAY of payment unless it is not cleared
    FedEx Tracking Number will be emailed from FedEx to PayPal email address or updated with Ebay
    FedEx Express used for Overnight Service unless otherwise requested
    International purchase generally shipped USPS for lowest rates
    We can ship by DHL, UPS, FedEx, Freight, and any carrier on request
    If you have any questions or problems with your purchase don't wait please contact us!
    We value your customer satisfaction and we aim to offer fast & reliable quality service.
    Very Important Notice To Buyers With Less Than 10 Ratings!
    You are not buying a spoon!
    Most of our CCNA CCNP buyers are students and still learning how to access, configure and manage Cisco equipment. Nothing we sell is simple or easy to use unless you already have experience with Cisco IOS and networking equipment. Occasionally student customers even have problems with items as simple as console cables.