110v 750w Electric Hydraulic Pump High Pressure 1000-10000psi Hand Control

Description

Electric
Hydraulic Pump 1000-10000psi
Rated working pressure
High pressure
70Mpa/ 700bar
Low pressure
7Mpa/ 70bar
Flow
Hypertension
1L/ min
Low-5L/min
Motor power
750W
Voltage
110V
Frequency
60Hz
oil storage volume of
7L
outside dimensions
11.8"*9.4"*15.7"
Specification
Should be used first quick connector quick connector sets equipped with hydraulic equipment connected. When plugged in, press the power switch to operate for some time, in the absence of pressure, the output hydraulic oil all the work, and the output hydraulic oil with increasing load all the work up to 70Mpa, the need to buck their own supercharged, press the solenoid valve switch the pressure back to zero and hydraulic equipment, hydraulic oil back to the fuel tank. Remove the quick connector sets the end, unplug the power.
Structure and working principle
Pump principle: (see oil system diagram)
(Set oil block) devices in the high pressure the output oil line where unloading relief valve to maintain the required output pressure and the security role.
The pump can be observed at any time to work when the pressure changes, ad hoc pressure gauge, so that users always observe the changes in the work. Control switches according to user needs, with manual switch.
When the pressure is below 7 MPa, the low pressure pump is working and the flow rate is 5 L /min. When the pressure is above 7 MPa, the high pressure pump is working
Item#
Description
QTY
Unit
Note
230503
DBD750-D1High Pressure Electric Pump
1
set
On May-27-21 at 00:16:31 PDT, seller added the following information: